can Filling machine ( 易拉罐灌装机调试 ) regulation

can Filling machine ( 易拉罐灌装机调试 ) regulation

一. 调节灌装液缸高度

把四根柱子上的螺丝松开，通过旋转液缸上的手轮，来调节液缸高度。

调整高度完成以后，把螺丝从新固定好。

主要作用，灌装不同高度的易拉罐。

1. Adjust the height of the filling liquid cylinder

Loosen the screws on the four posts and adjust the height of the cylinder by rotating the hand wheel on the cylinder.     After adjusting the height, fix the screws again.  The main function is to fill cans of different heights.

二 调节易拉罐封口系统高度

松开三个柱子上的螺丝，通过旋转上面的手轮，来调节封口系统的高度。

调节完成以后，固定好螺丝。

主要作用，灌装不同高度的易拉罐。

two. Adjust the height of the can sealing system

Loosen the screws on the three posts and adjust the height of the sealing system by turning the upper hand wheel.

After the adjustment is complete, fix the screws.